MONTESA 0235.011.1 Fork Spring 02M 25M 175 P/n 02.35.011.1

( Brand: Montesa ), ( Manufacturer Part Number: 0235.011.1 ), ( Part Type: Spring Fork ), ( Country/region Of Manufacture: Spain )

Review MONTESA 02m 25m 175 Inch Fork Spring P/n And #1 fits IMPALA 250 2011

The Montesa 0235.011.1 Impala fork spring is a vital component of the suspension system for various Montesa motorcycles. This specific spring is designed for 0.25 inch (6.35 mm) diameter forks with a travel length of 25 mm and a total length of 175 mm. It is suitable for motorcycles with an impala model designation.

This high-performance spring is manufactured to Montesa's exacting standards, ensuring optimal suspension performance and rider comfort. The spring's design offers excellent balance between stiffness and flexibility, allowing the fork to absorb shocks effectively while retaining control and responsiveness.

The Montesa 0235.011.1 Impala fork spring is made from high-quality, chrome-silicon steel, providing the necessary strength and durability. The material's resistance to fatigue ensures a long service life, even in the most demanding riding conditions.

The spring features a progressive rate design, which provides a consistent force throughout the entire travel range. This design ensures that the suspension absorbs small bumps effectively while maintaining the necessary support for larger impacts.

When installing the Montesa 0235.011.1 Impala fork spring, it is important to follow the manufacturer's instructions carefully to ensure proper alignment and installation. Properly installed, this spring will provide excellent suspension performance, enhancing the overall riding experience on your Montesa motorcycle.

In summary, the Montesa 0235.011.1 Impala fork spring is a high-quality and essential component for Montesa motorcycles with 0.25 inch (6.35 mm) diameter forks and a travel length of 25 mm. Its progressive rate design and durable construction ensure optimal suspension performance and rider comfort, making it an excellent investment for any Montesa motorcycle enthusiast.

The Montesa 0235.011.1.1 fork spring is a replacement part designed for Impala motorcycles with a 250cc engine and a travel length of 25mm. Here are some pros and cons that might help you make an informed decision about purchasing this part.

1. Designed specifically for Impala motorcycles with a 250cc engine, ensuring a precise fit.

2. Made of high-quality steel, ensuring durability and long-lasting performance.

3. Replacing worn-out or damaged fork springs can improve handling and ride quality.

4. Easy to install, typically requiring only basic tools and minimal mechanical skill.

1. Replacing fork springs can be a time-consuming process, especially for those without mechanical experience.

2. This part is specifically designed for Impala motorcycles with a 250cc engine and 25mm travel length. If you have a different model or travel length, you may need to purchase a different part.

3. The cost of this part may be higher than some aftermarket alternatives, although the quality may be superior.

In conclusion, the Montesa 0235.011.1.1 fork spring can be a worthwhile investment for Impala motorcycle owners with a 250cc engine and 25mm travel length. While the cost may be higher than some aftermarket alternatives, the precision fit and high-quality materials can provide improved handling and ride quality, making it a worthwhile investment for those who prioritize performance and longevity. Ultimately, the decision to purchase this part depends on your personal priorities and budget. If you value precise fit and high-quality materials, then this part may be the best choice for you. However, if you are on a tight budget or prefer aftermarket alternatives, you may want to explore other options.

Details:

Part is a 8 out of 10, 10 being new and 1 the worst condition. Bid is for one as seen in photo. Springs are straight. Montesa 02M 25M 175 250 Impala 11 Fork Spring p/n 0235.011.1 Count #1, Measures end.

Location: W 201 102/085 DFP. Look like some of the springs may be new but have surface rust. May fit both 250 and 175 Impala.

part #: 02350111 prices

• $9.75-$12.50

specifications fotubrak:

• for models: 250, Impala
• for years: 2011
• brand: Montesa
• mpn: 0235.011.1
• part type: Spring Fork
• country/region of manufacture: Spain

seller fotubrak:

• city: Mulino, Oregon
• # reviews: 26232
• rating: 100.0%

offer fotubrak:

• best offers: True
• availability: In Stock
• quantity: 7
• sold: 0
• options: Ship-to-home
• started: October 12, 2025

general fotubrak:

• Suspension Handling > k Suspension Parts > k Legs Tubes
• condition: Used

returns fotubrak:

• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

shipping fotubrak:

• service: USPS Ground Advantage
• cost: $7.67
• class: Standard
• carrier: USPS
• type: Calculated
• transit: 4-8 Days

payments fotubrak:

• money order
• credit card: Diners-club
• wallet: Apple-pay
• other

Montesa 0235.011.1 Is Similar To:

• Cappra 125 Mx Montesa Fork Lower (24.1% similar) Lower is bare with no screws or internals included. Please verify that the part number will work for your machine. 125 MC Capra Montesa fork lower P/N tel. Part is a 3 out of 10, 10 being new and 1 the worst condition. Axle hole has a 1/2 inch diameter. Lowers only. Bid is for a pair as seen in ...(August 31st, 2018)
• Betor 8 Montesa Cota Cappra Scorpion Enduro Fork Cap Bet (28.6% similar) Bid is for one. 1 being worst and 10 the best. Montesa coat Capra scorpion endure bettor fork cap P/N bet 8 measures 31MM diameter, round portion that goes onto the top of tube. Bettor fork parts. Good threads. Location: l 303 box swam. Condition is 9 out of 10. Threaded area has an outside diameter...(September 19th, 2019)
• Montesa 5135.020 5135020 Nos 51m Cota 348 349 Fork Internal Push Rod P n (38.5% similar) Location: n 204 105/265 DP. May fit other years and possible makes. Montesa oem part. Please verify that the part number will work for your machine. Montesa nos 51M coat 348 349 fork internal push rod p/n 5135.020 5135020 beautiful brand new. Bid is for one as seen in photos. Part is a 10 out of 10...(October 11th, 2025)
• Montesa 701029 Enduro 360 H7 Fork Tube Cap P n Ma 67m 1982-1987 (41.9% similar) Bid is for one as seen in photos. Mics out 30.5MM od at the threads, 32 nut, 38 top ring. Good threads. Good used condition. Montesa endure 360 h7 fork tube cap p/n ma. Does not fit endure 360 H6. Cap in photo is the worst looking of nine. Some scoring on nut, easy fix with a file. May fit other ...(October 11th, 2025)
• Montesa 2.35.001 Impala 250 Fork Tube P n 1966-1969 25m (53.2% similar) Bid is for one as seen in photos. Used but usable. Measures 25 1/8 or 64 cm inches end. Tube has a 30MM outside diameter. Tube is straight. Part is a 6 out of 10, 10 being new and 1 the worst condition. Montesa impala 250 fork tube p/n 2.35.001 1966 -1969 25M, fits model verified in our manuals. ...(October 11th, 2025)
• Montesa 4.127-200 Cappra 250 Va Right Fork Lower P n Bet Nos 73m 1975-1976 1 (48.1% similar) Montesa Capra 250 VA right fork lower p/n bet 4.127-200 nos 73M 1975 -1976 # 1, fits model 73M, double checked in our manuals. May fit other years and possible makes. Part is a 10 out of 10, being new and 1 the worst condition. Bid is for one, as seen in photos. Location: AA 104 201/120 swam fits ...(October 11th, 2025)
• Montesa 4.018-137 Cappra 250 Vr Black Right Fork Lower P n Nos 3 73m 1973-1974 (45.4% similar) Part is a 10 out of 10, being new and 1 the worst condition. May fit other years and possible makes. Bid is for one, as seen in photos. Montesa Capra 250 VR black right fork lower p/n 4.018-137 nos #3 73M 1973 -1974, fits 1973 -1974 model 73M, double checked in our manuals. Location: n 104 201/080...(October 11th, 2025)
• Montesa 34.35.112.1 King Scorpion 250 Right Fork Lowers P n J Nos 34m Late Model (45.1% similar) Montesa king scorpion 250 right fork lowers p/n 34.35.112.1 j nos 34M late model, fits model 34M, double checked in our manuals. May fit other years and possible makes. Location: r 101 201/080 swam fits late Montesa king scorpion 250 model 34M, double checked in our manuals. Bid is for one, as seen ...(October 11th, 2025)
• Montesa 4.129-234 Cappra 125 Vb Left Fork Lower P n Nos 38m 1976-1978 (44.4% similar) Please verify that the part number will work for your machine. Seals are not installed. Bid is for one, as seen in photos. Montesa Capra 125 vb left fork lower p/n 4.129-234 nos 38M 1976 -1978, fits 1976 -1978 model 38M, double checked in our manuals. May fit other years and possible makes. Part ...(October 11th, 2025)
• Montesa 4.129-200 Cappra 250 Va Left Fork Lower P n Bet 73m 1975-1976 3 (48.4% similar) Location: AA 102 201/120 swam fits 1975 -1976 Montesa Capra 250 VA model 73M, double checked in our manuals. May fit other years and possible makes. Solid used shape with no damage, just dirty bid is for one, as seen in photos. Montesa Capra 250 VA left fork lower p/n bet 4.129-200 nos 73M 1975 -...(October 11th, 2025)
• Montesa 4.127-234 Cappra 125 Vb Right Fork Lower P n Nos 38m 1976-1978 (46.8% similar) Bid is for one, as seen in photos. Seals are installed, mic out at about 35MM. Location: AA 204 201/080 swam fits 1976 -1978 Montesa Capra 125 vb model 38M, double checked in our manuals. Part is a 10 out of 10, being new and 1 the worst condition. Montesa Capra 125 vb right fork lower p/n 4.127-...(October 11th, 2025)